Tuesday, February 25, 2020

Plant installations must be installed separately

Plant installations must be installed separately from the copper cables to prevent them from being crushed and broken. Sometimes they hang carefully below the copper cable trays or are introduced into corrugated subducts. Using the corrugated subducts can save installation time since the duct (which can be purchased with tape to pull and remove the already incorporated cable), can be installed quickly without fear of causing damage and, then, allows to pull to remove the cable from Fiber optic quickly and easily. In some installations, fiber optic cables must be installed inside underground conduits, which requires care to minimize the possibility of bending the cable, allows the cable to be extracted by applying an intermediate force and, thus, to limit the force made in the extraction, or use lubricants for fiber optic cables.

The hardware that is needed for the installation is chosen according to the place where the termination of the cables will take place. In internal plant installations, connections usually point to point and no splices are made. Whenever possible, space for an extensive radius should be allowed in the connection panels or in the wall-mounted termination boxes to minimize fiber stress. You must choose hardware that is easy to access to move, add or modify, but that your access can be blocked to prevent intruders.
Cable installer certification
In internal plant installations, it is worth considering a pre-determined system. In these installations, backbone cables are used that terminate in multimode fiber connectors and pre-terminated connection panel modules. If the design of the building is adequate, the cable manufacturer can work together with you to create a “plug and play” fiber optic system that does not need a local termination and whose cost can be very competitive compared to a system of optical fiber finished in the field.

No comments:

Post a Comment