Disposal of fragments.
Fragments of fiber must be disposed of properly. For this, the waste must be collected in special containers such as small lockable bottles.
The fragments are usually thrown into the bin, on which a plastic bag should be worn. It is also necessary to make a clear inscription on the bucket: “Contains glass fragments”. When emptying the bucket, do not squeeze the bag, place it in another bag, and tie it.
Disposal of fiber splinters is the responsibility of the cable contractor and must be included in the work order, invoice, or contract. Fragments of fiber should never be thrown under raised floors, where unsuspecting workers could injure themselves in the future.
Even with all the precautions, everyone who deals with optical fiber is not safe from getting a finger in. Most often this happens during the installation of connectors or splicing cables when the sheath is removed from the fiber. What should be done in this case? To remove fragments from under the skin “you need Teflon-coated tweezers. It has a more resilient surface than ordinary steel tweezers. The latter can break a splinter, leaving part of it under the skin.
Workplace chemicals.
As in many other industries, various chemicals are used in working with fiber optics. Some cables use water repellent gels; in many connectors, the fibers are fixed using epoxy adhesive with ultraviolet, anaerobic, or thermal cure; in mechanical connectors to match the refractive indices, these or those liquids and gels are placed; the optical fiber is cleaned with alcohol or another solvent. In addition, it is necessary to pull the cable through the cable channels using various lubricants.
When sold, all of these materials must be accompanied by a Material Safety Data Sheet (MSDS). As part of the “right to knowledge” law, MSDS is derived from the Hazard Communication Standard, developed by the US Department of Labor Safety and Health Administration, issued in 1985.
MSDS includes detailed information about the manufacturer of the drug; about dangerous substances contained in it; about physical properties, flammability and explosiveness; health hazards; data on its ability to react with other substances; about the unpacking and use procedures, as well as about all special protective measures and precautions that must be observed when using this drug.
When ordering chemicals or materials containing chemicals, always require MSDS instructions. In addition, these instructions should be at hand and when working in the field.
In places of work with optical fiber should be prohibited from eating and drinking. It is best to do this in specially designated places and remember to always wash your hands after handling fiber and chemicals.
Also Read: fiber optic installation jobs
Despite the great number of safety rules at the workplace, they are effective only when they are strictly observed. To create a security problem, one person is enough, and only one person is able to prevent it.
Fragments of fiber must be disposed of properly. For this, the waste must be collected in special containers such as small lockable bottles.
The fragments are usually thrown into the bin, on which a plastic bag should be worn. It is also necessary to make a clear inscription on the bucket: “Contains glass fragments”. When emptying the bucket, do not squeeze the bag, place it in another bag, and tie it.
Disposal of fiber splinters is the responsibility of the cable contractor and must be included in the work order, invoice, or contract. Fragments of fiber should never be thrown under raised floors, where unsuspecting workers could injure themselves in the future.
Even with all the precautions, everyone who deals with optical fiber is not safe from getting a finger in. Most often this happens during the installation of connectors or splicing cables when the sheath is removed from the fiber. What should be done in this case? To remove fragments from under the skin “you need Teflon-coated tweezers. It has a more resilient surface than ordinary steel tweezers. The latter can break a splinter, leaving part of it under the skin.
Workplace chemicals.
As in many other industries, various chemicals are used in working with fiber optics. Some cables use water repellent gels; in many connectors, the fibers are fixed using epoxy adhesive with ultraviolet, anaerobic, or thermal cure; in mechanical connectors to match the refractive indices, these or those liquids and gels are placed; the optical fiber is cleaned with alcohol or another solvent. In addition, it is necessary to pull the cable through the cable channels using various lubricants.
When sold, all of these materials must be accompanied by a Material Safety Data Sheet (MSDS). As part of the “right to knowledge” law, MSDS is derived from the Hazard Communication Standard, developed by the US Department of Labor Safety and Health Administration, issued in 1985.
MSDS includes detailed information about the manufacturer of the drug; about dangerous substances contained in it; about physical properties, flammability and explosiveness; health hazards; data on its ability to react with other substances; about the unpacking and use procedures, as well as about all special protective measures and precautions that must be observed when using this drug.
When ordering chemicals or materials containing chemicals, always require MSDS instructions. In addition, these instructions should be at hand and when working in the field.
In places of work with optical fiber should be prohibited from eating and drinking. It is best to do this in specially designated places and remember to always wash your hands after handling fiber and chemicals.
Also Read: fiber optic installation jobs
Despite the great number of safety rules at the workplace, they are effective only when they are strictly observed. To create a security problem, one person is enough, and only one person is able to prevent it.
No comments:
Post a Comment